The primary significance of a sewer drain snake is clearing the main drain stop. Immediately after confirmation of a principal sewer line clog, you may consider removing it by yourself. If you decide to rent yourself a sewer drain line snaking tool then you can do so. However, you should note that the process of clearing the mainline stoppage is more complex than you could have imagined. In case you feel that the expertise required for this task is beyond your knowledge and abilities. You can contact a professional company like the Pump My Poop Septic bring in our professionals who will devise various ways to tackle the problem.
If you decide to rent a machine, you need to bear in mind that different people rent differently. It is therefore essential that you compare the prices first, before you make up your mind. If you’re absolutely sure you’re going to be able to do the clean-out yourself, then you can take advantage of the following guidelines even as you’re trying to achieve that goal.
The first thing you need when choosing the line snaking method is to locate the main clean-out area, and move on to removing the cap. After removing the lid you will now be required to check for any standing water in the pipe. If you realize there is any standing water, you will need to run the cable toward the street. However, if you recognize that there is no water, you’ll have to change and run the cable toward the house.
After the first procedure has been completed, you will now have to move on and ensure that the drain snake is positioned as close to the clean-out area as possible. This positioning will help you avoid becoming embroiled. In this case your security is determined by the amount of slack on your cable.
After positioning the drain snake, you will now have to put firm gloves on, which the machine will not grab quite fast during the turning period.
You will now need to move on and remove the cable head and place it in the cleanout after you have ensured that gloves are placed firmly on your hands.
Make sure you place both of your hands on the cable shoulder while holding it firmly. This holding will help to improve any lesions that may occur during the process.
After inserting the cable into the target area, you will now need to move on and hold the machine in forward position before eventually switching on. Gently feed the cable into the drain, while holding the cable in your hand. You’re going to have to be very careful during this stage though. You will need to move the cable back as quickly as possible in case you hit anything like a clog as the impact may lead to kink.
You’ll need to slowly retract the cable if you reach a tight spot during this process. After that, you’ll need to feed the cable in again slowly while observing any resistance. You should be careful not to forcefully feed the cable into the area during this process, as that could cause the wire to overturn.
Continue moving the cable back and forth to ensure complete clearing of the clog. If you realize that there will no longer be a clog, you will still have to move the 10-foot cable into the drainage to ensure that there is no more clogging.
The aforementioned tips are a complete procedure for effectively performing line snaking in the event of any obstruction to your drainage system. Follow them closely and the process will be successful for you. Or to make your life easy, simply contact a top company to help if you realize that this method makes the state of your drainage system more complicated to perform and its better to go with an expert. One of the top firms that you could use for this job is Pump My Poop Septic Services and we will further help and assist you.
Come to Pump My Poop Septic Services
We are the best company, and we shall offer you the best services in the best way we know-how. Here is a list of the services that you can request from our brand: